#14151: "WAS NOT ALLOWED TO SWITCH THE LOCATIONS OF THE CLIMBERS"
What is this report about?
What happened ? Please select from below
What happened ? Please select from below
Please check if there is already a report on the same subject
If yes, please VOTE for this report. Reports with the most votes are taken care of in PRIORITY!
| # | Status | Votes | Game | Type | Title | Last update |
|---|
Detailed description
-
• Please copy/paste the error message you see on your screen, if any.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• Please explains what you wanted to do, what you do and what happened
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 • What is your browser?
Google Chrome v79
-
• Please copy/paste the text displayed in English instead of your language. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Is this text available in the translation system? If yes, has it been translated for more than 24 hours?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• What is your browser?
Google Chrome v79
-
• Please explain your suggestion precisely and concisely so that it's as easy as possible to understand what you mean.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• What is your browser?
Google Chrome v79
-
• What was displayed on the screen when you were blocked (Blank screen? Part of the game interface? Error message?)
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• What is your browser?
Google Chrome v79
-
• Which part of the rules was not respected by the BGA adaptation
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• Is the rules violation visible on game replay? If yes, at which move number?
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 • What is your browser?
Google Chrome v79
-
• Which was the game action you wanted to do?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• What do you try to do to trigger this game action?
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 -
• What happened when you try to do this (error message, game status bar message, ...)?
• What is your browser?
Google Chrome v79
-
• At which step of the game did the problem occurs (what was the current game instruction)?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
-
• What happened when you try to do a game action (error message, game status bar message, ...)?
My situation happened on table #60966241
I was player yellow RobertV.
In the middle of the game, I tried to switch between the following locations:
elevation: 7000
move cost: 2
aclimation: -1
points: 5
---
elevation: 7000
move cost: 2
aclimation: -1
points: 6 • What is your browser?
Google Chrome v79
-
• Please describe the display issue. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• What is your browser?
Google Chrome v79
-
• Please copy/paste the text displayed in English instead of your language. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Is this text available in the translation system? If yes, has it been translated for more than 24 hours?
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• What is your browser?
Google Chrome v79
-
• Please explain your suggestion precisely and concisely so that it's as easy as possible to understand what you mean.
Right now it is not possible to switch the climbers.
Movement is simultaneous per player pieces.You can swap your own pawns.
It should be allowed to move 1 pawn up to position to another pawn then move the second pawn down to the previous first pawn location.
Situation:
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
The rule allows for a player to switch their climbers in the same turn!
• What is your browser?
Google Chrome v79
Report history
Location A (only 2 climber allowed) has 2 climbers (blue1, yellow1)
Location B (only 2 climber allowed) has 2 climbers (yellow2, green1)
Location A and B are adjacent.
Yellow would like to swich => getting error that he cannot go from A to B because there are already 2 climber on that location. Same happen when he try to go from B to A.
Your bug has probably been fixed already, or was linked to a temporary failure of BGA service.
In any case, when filling a bug report, make sure to have an explicit title linked to the incident (ex: with error message), so other players can recognize it and vote for it.
Add something to this report
- Another table ID / move ID
- Did F5 solve the problem?
- Did the problem appears several time? Everytime? Randomly?
- If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.
